See also:
  HKP 5 metal detector

TPV-102 Conveyor Belt Weigher

The integrated, microprocessored conveyor belt weigher (scales) for conducting continuous weighing and dosage of loose material on conveyor belts. The set is composed of weighing unit with the tensometric gauge of load. The weighing unit is built up in a conveyor belt. The signal from tensometric gauge is strengthened and analyzed in the RVS027E control unit.

Basic functions:

Semi-automatic taring
Accumulation of daily / total load
Reseting daily load
Visualization of the load in the particular moment (t/h)
Possibility to expand functions according to client’s needs

Technical data:
Capacity: 0,5 t/h to 10000 t/h
Belt’s speed: 0,02 m/s to 5 m/s
Belt’s width: 400 mm to 1800 mm
Belt’s inclination: 0° to 20°
Voltage: 230 V +/- 10%, 50 Hz
Temperatures’ range: -15° C to +55° C
Input power:
Control unit 10 VA
Amplifier 5 VA
Casing: IP 54
Strain gauge TDA 1260
Measurement’s precision: OIML 50 first class of precision (+/- 0,5%) )

Inputs

One analogue input 0 to 4095 mV (12-bits converter A/D)
6 digital inputs, separated galvanically

Outputs

1 digital output separated galvanically - relay 2 A; 230 V (in DPV version)
on special client’s need there is analogue output 0 to 4095mV or current loop 4(0) to 20mA RS 232 to 20 m or RS 485 to 1200 m
The number of inputs and outputs could be adjusted to client’s needs
Max. distance from weigh unit to control unit – up to 1500 m
Possibility to plug in printer and/or PC
Possibility of connection with gauging and controlling systems (pod’s hatch, controlling frequency’s transformers)